Tone Commander 8810 - Setting up the Call Directory

Tone Commander 8810 User Guide 39
Setting Up the Call Directory
Up to 100 numbers can be stored in the Call Directory. Call Directory
entries are similar to Speed Dial keys, but are accessed from a display
menu. Place your most frequently-dialed numbers on Speed Dial keys,
if available, and put other numbers in the directory.
Call Directory entries are displayed on 10 screen pages, with 10 entries
per page. The current page number (1-10) will be shown in the display.
Press the
DIR key.
Or, from the User Options menu, select DIR
(
SETUP → USER → DIR),
Page 1 of the Call Directory will be shown in the display.
Currently programmed keys will be shown with a name
display; available positions for new entries will be blank.
To see a different Call Directory page, select a page by
pressing a dial pad key (1-9, or 0 for page 10), or press the Up
Arrow or Down Arrow key until the desired page is displayed.
DIRECTORY PAGE 1
VIEW EDIT SORT SWAP
April 21, 2008
Earl Snyder
Christie Ramos
4:23 PM
Addie McCrady
Kody Levett