32 Tone Commander 8810 User Guide
<BKSP FA PAUSE LABEL
F575551234
Feature Activator Codes
Feature activator codes are assigned by your network service provider.
Consult with your network service provider for the required codes.
Feature Activator (FA) numbers are entered with the FA
softkey, and are shown in the display as an F character. F
must be the first character in the dialing string; the two
numeric digits immediately following the F indicate the
network feature activator code. The FA softkey is only
available when no digits have been entered.
After entering F, the FA softkey will be replaced by CLEAR.
In the example below, the Speed Dial key sends feature code
‘57’ (Call Forward) followed by the directory number
‘555-1234’.
Key Labels
Select LABEL to enter a customized key label – see page 29.
When the feature activator code and label have been entered,
press the
OK key to return to the key selection menu.
To Next Page
Loading...
