Tone Commander 8810 - Answering a Call

4 Tone Commander 8810 User Guide
13) Dial Pad – dials telephone numbers, and sends DTMF tones to
external equipment such as voice mail systems. The dial pad is
also used for text and number entry during setup.
14)
TRAN (Transfer) Key – places the current call on hold, and selects
an idle call appearance for transferring the call. A second press
completes a transfer (page 10).
15)
CONF (Conference) Key – adds other parties to a conference call
(page 10).
16)
DROP Key – removes the last party added to a conference call, or
disconnects you from a call and returns new dial tone when not in
conference mode (page 11).
17)
HOLD Key – places a call on hold (page 9).
18)
VMAIL (Voice Mail) Key – accesses network voice mail services
(page 20).
19)
HEADSET Key – activates the headset. A green indicator is lit
when the headset is in use (page 19).
20) Headset Jack – a jack on the underside of the telephone connects
to an optional standard headset.
21) Handset Jack – a jack on the underside of the telephone connects
to the included handset.
22) Microphone – used for hands-free (speakerphone) calling; located
under the right front corner of the telephone.
23) Telephone Identification Label Area – indented area for a
directory number label. Use ½” x 1¾” adhesive labels (Avery 8167 /
5267 or equivalent).