Topcnc TC55V - Product Introduction; Technical Specifications; Conversational Programming Code

1. Product Introduction
TC55E is an upgrading version of TC55. It is equipped with 3.5 inch color screen, RS 485
communication, Chinese/English Switch, and USB connection. Boot picture can be set as pictures
or company name as you will. It is highly reliable, highly accurate, low noise and easy to use.
2. Technical Specifications
Minimum data unit 0.001 mm
Maximum data size ± 99999.999mm
Maximum Speed: 9000mm/min (pulse is 0.001mm)
Maximum pulse output frequency 150KHz
Axis 1-4 (X,Y, Z,C)
X,Y,Z,C axis can conduct linear interpolation, X,Y can do circular interpolation.
Electric Gear: numerator :1-99999 denominator: 1-99999
System main functions are automatic, manual, program editing, system parameters, self-check,
settings, etc.
Maximum 480 commands each program
USB Connection and upgrade
Stop and Start of Spindle motor
PLC Extension
I/O Extension
Isolated I/O port
Self defining of I/O port
Chinese/English panel display
Free boot picture setting
3. Conversational Programming Code
Conversational programming method, automatically lead you to finish programming.
3.1 Programming Function Introduction
Programming Code
Interpretation
Incremental
Incremental Programming
Absolute
Absolute Programming
Pause
Pause unless certain condition is met, then skip to command called
Output
Define on and off of output port, ex. Stop and start of spindle motor
Repeat
Go back to command called and repeat
Clockwise
Clockwise circular interpolation (Incremental programming)
Counter-clockwise
Counter Clockwise interpolation(Incremental programming)