Left：n1 Incremental X 10.000 Y 0
n2 Counter-clockwise X 10.000 Y 10.000 R-10
Right：n1 Incremental X 10.000 Y 0
n2 Counter-clockwise X 6.000 Y 18.000 R-10
How to draw a full circle whose diameter is 50mm.
n1 Clockwise X100 Y0 R50
n2 Counter-clockwise X-100 Y0 R50
3.3 Parameter Set
**Before the setting of parameters, please log in. Par-User-User code-123456
3.3.1 Control Parameters
Language: Choose English or Chinese
External IO: the I/O port number can be extended using TC55-KA(not included in TC55 package)
to 30/24.
External PLC: PLC TC4616(not included in TC55 package) can be extended.
X axis Reference Point: In manual operation, long press 1 to clear the coordinates and show
this value; or in machine zero, after hit the switch, it will show this value.
X Axis Numerator（1-99999）
X Axis Denominator (1-99999)
Y axis Reference Point: In manual operation, long press 2 to clear the coordinates and show
this value; or in machine zero, after hit the switch, it will show this value.
Y Axis Numerator（1-99999）
Y Axis Denominator (1-99999)
Z axis Reference Point: In manual operation, long press 3 to clear the coordinates and show
this value; or in machine zero, after hit the switch, it will show this value.
Z Axis Numerator（1-99999）
Z Axis Denominator (1-99999)
C axis Reference Point: In manual operation, long press 6 to clear the coordinates and show
this value; or in machine zero, after hit the switch, it will show this value.
C Axis Numerator（1-99999）
C Axis Denominator (1-99999)
Speed+Time(ms): time use for motor to reach F speed.
Jog+No.(um): in manual operation, increment for jogging.
X Gap(um): X axis adjusting gap(to make it more precise)
Y Gap(um): Y axis adjusting gap(to make it more precise)
To Next Page
Loading...
Need help?
General
