Topcon ES-62 - Display Internal Memory Status

9-2
9 MEMORY MANAGER MODE
9.1 Display Internal Memory Status
This mode is used to check the internal memory status.
Operating procedure Operation Display
1 Press the {F3} (MEMORY MGR.) key from the
menu 1/3.
{F3}
2 Press the {F1} (FILE STATUS) key.
The total number of stored measured data files
and coordinate l files are shown.
{F1}
Remaining memory capacity
3 Press the {F4} (P ↓ ) key.
The total number of stored measured data and
coordinate data in all files are shown.*1)
{F4}
*1) Each coordinate file has one extra data for working area.

• The FILE/DATA STATUS display will change alternately by pressing {F4} (P ↓ ) key.
• To return to MEMORY MGR. menu press the {ESC} key.
MEMORY MGR. 1/3
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN P
↓
FILE STATUS 1/2
MEAS. FILE : 3
COORD. FILE: 6
[...........] P
↓
DATA STATUS 2/2
MEAS. DATA :0100
COORD. DATA:0050
[...........] P
↓