Topcon T18 User Manual

Clean Boot
3-2
P/N: 1027700-01
Display Panel
Figure 3-4: Go-to-Sleep Mode
Clean Boot
Select Start > Settings > System > Clean Boot, to restore factory default settings according to
the guide.
Figure 3-5: Clean Boot
PWConfig
Select Start > Settings > System >PWConfig.
Figure 3-6: PWConfig
The password is “1234”. Restoring factory settings will clear the system
configuration, please be cautious.
While on Screen off mode, the device won’t hibernate.

Topcon T18 Specifications

General

Brand	Topcon
Model	T18
Category	Controller
Language	English