Topcon X35 Console User Manual

Chapter 1 – Introduction
5
1.3. Installation
1. Attach the cameras to the desired locations on the vehicle. The
camera bases are magnetic and may be attached to any metallic
object.
2. Connect the A3453 CABLES to each camera and run the cables
into the cabin at a suitable entrance. Ensure cables are secured out
of the way of any moving parts, using supplied cable ties.
Note: Optional 60 foot extension cables (A3454) may be
purchased if required.
3. Connect the A3453 CABLES to the 1004680-01 or 1016437-01
ADAPTER.
4. Connect the ADAPTER connector to the console port:
l Connect the 1004680-01 ADAPTER USB connector to the
console USB port (located at the rear of the console). Ensure the
USB connector is secured by turning the bayonet fastener.
Connect the power cable supplied with 1004680-01 ADAPTER
between the vehicle cigarette lighter and the 1004680-01
ADAPTER.
l Connect the 1016437-01 ADAPTER analog connector to one of
the console's analog ports (located at the rear of the console).

Topcon X35 Console Specifications

General

Brand	Topcon
Model	X35 Console
Category	Controller
Language	English