Topcon X35 Console - Setting Up Default Camera Settings

2.2. Setting up default camera settings
8
2.2. Setting up default camera settings
1.
Select System / Cameras / Default .
The following options are available:
l Camera loop time:Time in seconds (between 5 and 30) before
moving to the next camera when looping through cameras
automatically.
l Thumbnail frame rate: A frame rate between 1 and 10, used by
thumbnail views at the base of full screen view. A lower frame
rate may increase console performance speed for other operations.
l Default colour encoding: NTSC or PAL. Sets the colour
encoding for all cameras. (See colour encoding for individual
cameras on General tab.)
l Camera ribbon:Displays or hides the ribbon at the bottom of
the camera display when in full view mode with multiple cameras
installed.