Topens MK1101 User Manual

Swing Gate Opener
User’s Manual
Model:
VER 21a
C030009
MK1101 / MK1102
MK1301 / MK1302
MK1101M / MK1102M
MK1301M / MK1302M
MK1501M / MK1502M
★ Please read and follow all warnings, precautions and instructions before
installation and use.
★
Never connect the solar panel to the control board directly to charge the battery.
★ Periodic checks of the opener are required to ensure safe operation.
★
Save this manual.

Topens MK1101 Specifications

General

Brand	Topens
Model	MK1101
Category	Gate Opener
Language	English

Summary

Safety Installation Information

Dual Gate Opener Parts List

Single Gate Opener Parts List

Optional Accessories Parts List

Technical Specifications & Features

Dual Gate Overview

Single Gate Overview

Preparation for Installation

Install the Gate Opener on the Gate

Pull-to-Open Installation

Details on installing the opener for gates that swing outwards from the property.

Push-to-Open Installation

Details on installing the opener for gates that swing inwards towards the property.

Mounting of the Control Box

Connection of the Power Supply

Connection of the Control Board

Motor Connections

Wiring for the gate opener motors in pull-to-open and push-to-open configurations.

Safety Device Wiring

Connects safety sensors like photocells for safe operation.

User Interface Wiring

Connects keypads, push buttons, and remote receivers to the control board.

How to learn or erase the Remote

Control Board Settings

Gate Operation Modes

Configure single/dual gate and master/slave operation modes.

Gate Timing Adjustments

Set open/close intervals, auto-close time, and soft start periods.

Safety and Force Settings

Adjust obstruction sensitivity, stall force, and photocell beam system.

Motor and Running Time Settings

Configure motor running time and fast running periods for optimal performance.

Adjusting the Limit Switch

How to Operate

Maintenance

Trouble Shooting

Quick-Setting Guide