Toptech MultiLoad II DIV-2 User Manual

37
MultiLoad II Additive Wiring: Outputs 5.4.2
L
N
15A
I/O DIGITAL/
ANALOG
I/O 2 METER
METER 0 METER 1
PORT 1
PORT 3
PORT 2/
PORT 0.OUT
PORT 0.IN/
LINE.IN
PORT 0
S
1
S
2
S
3
S
4
+
L
N
S
#1
+
L
N
S
#2
+
L
N
S
#3
+
L
N
S
#4
IO_DA ONLY!
L
N
PORT 1.OUT
PORT 1.IN/
LINE.IN
IN 10

OUT 9

IN 8

OUT 7

IN 6

OUT 5

IN 4

OUT 3

IN 2
OUT 1
PORT 2
IO_DA TB1
PORT 0
PORT 1
PORT 3
PORT 8
PORT 0 OUT 5

PORT 1 OUT 4

PORT 2 OUT 3
PORT 3 OUT 2

LINE IN 1

IO_2M TB3
PORT 0 OUT 5

PORT 1 OUT 4

PORT 2 OUT 3
PORT 3 OUT 2

LINE IN 1

IO_2M TB2
PORT 3
PORT 2.OUT/
PORT 2.IN/
LINE.IN
PORT 3.OUT
PORT 3.OUT
PORT 3.IN
Note: The output port that is selected will dictate which port is used for the additive input. For example, if Port 0 is selected as the FCM Port#, the output will
be on port 0 and the corresponding input will be at port 7. See Table above for possible port assignments.
Output
Port
Input
Port
Injector #1 0 7
Injector #2 1 6
Injector #3 2 5
Injector #4 3 4

Toptech MultiLoad II DIV-2 Specifications

General

Brand	Toptech
Model	MultiLoad II DIV-2
Category	Controller
Language	English