Toptech MultiLoad II DIV-2 User Manual

59
Using this same screen as an example, the Processing Mode line is selected and ENTER is pressed;
use the NEXT or PREV keys to toggle between the values ENABLED and DISABLED, as shown below.
You must then press ENTER to accept the desired choice.
MultiLoad II/ RCU II Preliminary Configuration 6.5
1) Power-on the MultiLoad II/ RCU II.
2) When the MultiLoad II is first powered-on, the card–in screen appears, indicating Operating Mode.
An RCU II may initially display “System Unavailable” because it is unconnected to a host system.
RCU GENERAL SETUP
RCU Address: 123█
Card Reader: DISABLD
Processing Mode: Remote
Swing Arn Secondary: DISABLD
Terminal Name: Toptech Terminal
Security Accounts
Next Prev Exit Enter
RCU GENERAL SETUP
RCU Address: 123
Card Reader: DISABLD
Processing Mode: Remote
Swing Arm Secondary: DISABLD
Terminal Name: Toptech Terminal
Security Accounts
Enter Exit

Toptech MultiLoad II DIV-2 Specifications

General

Brand	Toptech
Model	MultiLoad II DIV-2
Category	Controller
Language	English