Toro 03606A - Adjusting the Tire Pressure; Adjusting the Step Height; Adjusting the Control-Arm Position

1
AdjustingtheTirePressure
NoPartsRequired
Procedure
Thetiresareover-inatedforshipping.Therefore,
releasesomeoftheairtoreducethepressure.
Correctairpressureinthefrontandreartiresis83
to103kPa(12to15psi).
Important:Maintainevenpressureinalltiresto
ensureuniformcontactwiththeturf.
2
AdjustingtheStepHeight
NoPartsRequired
Procedure
Theheightofthestepscanbeadjustedforyour
comfort.
1.Removethe2boltsandnutssecuringthestep
bracketstothetraction-unitframe(Figure2)
g003959
Figure2
1.Step2.Stepbrackets
2.Raiseorlowerthesteptothedesiredheight
andsecurethebracketstotheframewiththe
2boltsandnuts.
3.Repeattheprocedureontheotherstep.
3
AdjustingtheControl-Arm
Position
NoPartsRequired
Procedure
Thecontrol-armpositioncanbeadjustedforyour
comfort.
1.Loosenthe2boltssecuringthecontrolarmto
theretainingbracket(Figure3).
g004152
Figure3
1.Controlarm
3.Bolt
2.Retainingbrackets
2.Rotatethecontrolarmtothedesiredposition
andtightenthe2bolts.
13