Toro 03606A - Adjusting the Parking-Brake Latch; Belt Maintenance; Servicing the Alternator Belt

Adjustingthe
Parking-BrakeLatch
Iftheparkingbrakefailstoengageandlatch,adjust
thebrakepawl.
1.Loosenthe2screwssecuringtheparking-brake
pawltotheframe(Figure86).
g011617
Figure86
1.Brakecables3.Parking-brakepawl
2.Screw
4.Brakedetent
2.Presstheparking-brakepedalforwarduntilthe
brakedetentcompletelyengagesonthebrake
pawl(Figure86).
3.Tightenthe2screwslockingtheadjustment.
4.Pressthebrakepedaltoreleasetheparking
brake.
5.Checktheadjustmentandadjustasrequired.
BeltMaintenance
ServicingtheAlternator
Belt
ServiceInterval:Aftertherst10hours
Every100hours
Note:Propertensionwillallow10mm(3/8inch)
deectionwhenaforceof44N(10lb)isappliedon
thebeltmidwaybetweenthepulleys.
1.Ifthedeectionisnot10mm(3/8inch),loosen
thealternatormountingbolts(Figure87).
g020537
Figure87
1.Mountingbolt2.Alternator
2.Increaseordecreasethealternator-belttension
andtightenthebolts.
3.Checkthedeectionofthebeltagaintoensure
thatthetensioniscorrect.
57