Toro 04383 - Lubrication; Greasing the Bearings and Bushings

Lubrication
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours(morefrequentlywhen
operatingconditionsaredustyordirty)
Themachinehasgreasettingsthatmustbelubricated
regularlywithNo.2GeneralPurposeLithiumBaseGrease.
Ifthemachineisoperatedundernormalconditions,lubricate
allbearingsandbushingsafterevery50hoursofoperation.
Lubricatettingsimmediatelyaftereverywashing,regardless
oftheintervallisted.
Thefollowingmachinebearingsandbushingsmustbe
lubricated:
•Rearwheelhub(1)(Figure41)
Figure41
•Castorbearing(1)(Figure41)
•Steeringcylinder(2)(Figure41)
•Liftarms(3)(Figure42)
Figure42
•Tractionpedalpivot(1)(Figure43)
Figure43
1.Wipethegreasettingcleansoforeignmattercannot
beforcedintothebearingorbushing.
2.Pumpgreaseintothebearingorbushing.
3.Wipeupexcessgrease.
4.Applygreasetothereelmotorsplineshaftandontothe
liftarmwhenthecuttingunitisremovedforservice.
5.ApplyafewdropsofSAE30engineoilorspray
lubricant(WD40)dailytoallpivotpointsafter
cleaning.
Note:RefertotheCuttingUnitOperator’sManualforcutting
unitlubricationrequirements.
36