Toro 04530 - Page 44

g234252
Figure44
1.Sightwindowlocation
3.Breather
2.Hydraulic-tankcap
3.Removethedipstickandwipeitwithaclean
rag,thenscrewthedipstickbackintothetank.
4.Removethedipstickandchecktheuidlevel.If
theuidisbetweenthemarksonthedipstick,
thelevelissufcient.Iftheuidlevelisnot
betweenthemarks,moreuidisneeded.
5.Removethecapordipstick(dependingonyour
machine)fromthehydraulicuidtankandslowly
llthetankwiththeappropriatehigh-quality
hydraulicuiduntilthelevelisbetweenthe2
marksonthesightwindowordipstick.
Note:Donotmixuids.
6.Installthecap.
Note:Performaclosevisualinspectionofthe
hydrauliccomponents.Inspectthemforissues
(e.g.,leaks,loosefasteners,missingparts,and
improperlyroutedlines).Makeanynecessary
corrections.
ChangingtheHydraulicFluidand
Filter
ServiceInterval:Aftertherst50hours
Every800hours
HydraulicFluidCapacity:25.7L(6.8USgallons)
Iftheuidbecomescontaminated,haveyour
authorizedTorodistributorushthesystem.
Contaminateduidlooksmilkyorblackwhen
comparedtocleanuid.
1.Cleantheareaaroundtheltermountingarea
(Figure45).Placeadrainpanunderthelter
andremovethelter.
g014619
Figure45
1.Hydraulic-uidlter
Note:Ifyouwillnotbedrainingtheuid,
disconnectandplugthehydrauliclinegoingto
thelter.
2.Fillthereplacementlterwiththeappropriate
hydraulicuid,lubricatethesealinggasket,and
handturnituntilthegasketcontactsthelter
head.Thentightenit3/4turnfurther.
3.Fillthehydraulicreservoirwithhydraulicuid;
refertoHydraulicFluidSpecications(page42)
andCheckingtheHydraulic-FluidLevel(page
43).
4.Startthemachineandrunitatidlefor3to5
minutestocirculatetheuidandremoveanyair
trappedinthesystem.Shutofftheengineand
checktheuidlevel.
5.Disposeoftheuidandlterproperly.
44