EasyManua.ls Logo

Toro 07433LT - Page 13

Toro 07433LT
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parking-Brake Lever
The parking-brake lever is located on the control
panel ( Figure 7 ).
Whenever you shut of f the machine, engage the
parking brake to prevent the machine from accidentally
moving. If the machine is parked on a steep grade,
ensure that you engage the parking brake.
T o engage the parking brake, pull the parking-brake
lever toward you ( Figure 8 ).
g033923
Figure 8
1. Parking-brake lever
T o disengage the parking brake, push down the
button on top of the parking-brake lever , pull the
parking-brake lever toward you to release pressure,
and then push the parking-brake lever forward ( Figure
9 ).
g033924
Figure 9
1. Parking-brake lever
Direction Selector
The direction selector is located to the left of the
parking-brake lever . The direction selector has 2
positions: F ORWARD and R EVERSE ( Figure 7 ).
Important: Always stop the machine before
changing direction.
Horn Switch
The horn switch is located on the control panel ( Figure
7 ). Press the horn switch to sound the horn.
Light Switch
Use the light switch ( Figure 7 ) to illuminate the
headlights. Push the light switch up to turn on the
headlights. Push the light switch down to turn of f the
lights.
USB Port
Use the USB port ( Figure 7 ) to power mobile devices.
Important: When you are not using the USB port,
insert the rubber plug to prevent damage to the
port.
Key Switch
Use the key switch ( Figure 7 ), to run and shut of f the
machine.
The key switch has 2 positions: O N and O FF . Rotate
the key clockwise to the O N position to operate the
machine. When you stop the machine, rotate the key
counterclockwise to the O FF position to shut of f the
machine. Remove the key whenever you leave the
machine.
13

Table of Contents

Related product manuals