Toro 20058 - Starting the Engine (Model 20056); Engage Ignition Switch (Model 20056); Prime the Engine (Model 20056); Start Engine (Model 20056)

Figure 18
Starting the Engine
Model 20056 onl y
1. Push the ignition tog gle switc h to the On (“I”) position
( Figure 19 ).
Figure 19
1. Ignition toggle switch
2. Fir mly push in the primer 3 times with y our thumb ,
holding the primer in for a second before releasing it
eac h time ( Figure 20 ).
Figure 20
Note: If the air temperature is belo w 55°F (13°C),
fir mly push the primer in 5 times .
3. Star t the engine in one of 2 w a ys:
• Pull the recoil star ter in the operating position
( Figure 21 ).
Figure 21
• Pull the recoil star ter at the engine ( Figure 22 ).
Figure 22
4. If the mo w er does not star t in 1 or 2 pulls , press the
primer button 1 or 2 times and tr y star ting it ag ain.
Note: If the mo w er still does not star t, contact an
A uthorized Ser vice Dealer .
Starting the Engine
Model 20058 onl y
1. Fir mly push in the primer 3 times with y our thumb ,
holding the primer in for a second before releasing it
eac h time ( Figure 23 ).
Figure 23
Note: If the air temperature is belo w 55°F (13°C),
fir mly push the primer in 5 times .
2. Star t the engine in one of 3 w a ys:
• T ur n the ignition k ey to the Star t position; when the
engine star ts , release the k ey ( Figure 24 ).
10