Figure 6
5. Attac h the handle brac k ets ( Figure 7 ) to the lo w er
handle sides .
Figure 7
1. Handle bracket (2)
3. Filling the Engine with Oil
Y our mo w er does not come with oil in the engine .
1. R emo v e the dipstic k ( Figure 8 ).
Figure 8
2. Slo wl y pour oil into the oil fill tube until the oil lev el
reac hes the Full line on the dipstic k ( Figure 8 ). Do not
o v erfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30W
deterg ent oil with an API ser vice classification of SF ,
SG , SH, SJ , SL, or higher .)
3. Install the dipstic k securely .
Important: Change the engine oil after the fir st 5
operating hour s ; change it y ear l y ther eafter . R efer
to Changing the Engine Oil.
4. Installing the Fuse
Model 20058 onl y
Y our mo w er comes with a 40-amp fuse that protects the
electric star ter .
Important: Y ou cannot star t the mo w er with the
electric star ter or charge the batter y unless y ou install
the fuse.
1. Unclip both ends of the batter y co v er and remo v e it
( Figure 9 ).
Figure 9
2. Install the fuse in the fuse holder ( Figure 10 ).
Figure 10
Note: Y our mo w er comes with a fuse in the y our
o wner’ s pac k et and another fuse in the batter y bo x.
3. Install the batter y co v er .
7
To Next Page
Loading...
