Toro 30487N - Controls System Maintenance; Adjusting the Control Lever Neutral Interlock Switch; Adjusting the Control Lever Neutral Return

ControlsSystem
Maintenance
AdjustingtheControlLever
NeutralInterlockSwitch
1.Stopthemachine,movethedeckliftswitchfullyinto
theneutral-lockedposition,settheparkingbrake,and
removetheignitionkey.
2.Removetheboltssecuringthefrontpanelandremove
thepanel(Figure53).
1
2
G020875
Figure53
1.Bolts
2.Seatplate
3.Loosenthe2screwssecuringtheinterlockswitch
(Figure54).
Figure54
1.Controllever3.Screws
2.Neutralinterlockswitch
4.0.4to1mm(0.015to
0.045inch)
4.Holdingthecontrolleveragainsttheframe,movethe
switchtowardtheleveruntilthedistancebetweenlever
andswitchbodyis0.4to1mm(0.015to0.045inch)
(Figure54).
5.Securetheswitch.
6.Repeatsteps3to5fortheotherlever.
7.Installthefrontpanel.
AdjustingtheControlLever
NeutralReturn
Ifthemotioncontrolleversdonotalignwiththeneutralslots
whenreleasedfromthereversedriveposition,adjustmentis
required.Adjusteachlever,spring,androdseparately.
1.DisengagethePTO,movethecontrollevertothe
neutrallockedposition,andsettheparkingbrake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
3.Removetheboltssecuringthefrontpanelandremove
thepanel(Figure55).
47