Toro 30487N - Changing the Hydraulic Oil and Filter

Figure63
1.Dipstick2.Fillcap
6.Removethedipstickandwipeitwithacleanrag
(Figure63).
7.Placethedipstickintothellerneck;thenremoveit
andchecklevelofuid(Figure63).
Note:Iflevelisnotwithinnotchedareaofthe
dipstick,addenoughhighqualityhydraulicuidto
raiseleveltowithinthenotchedarea.Donotoverll.
8.Replacethedipstickandthreadthellcapnger-tight
ontollerneck.
9.Checkallhosesandttingsforleaks.
ChangingtheHydraulicOil
AndFilter
ServiceInterval:Aftertherst200hours
Every800hours
1.DisengagethePTO,movethemotioncontrolleversto
theneutrallockedposition,andsettheparkingbrake.
2.MovethethrottlelevertotheSlowposition,stopthe
engine,removethekey,andwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
3.Placealargepanunderthehydraulicreservoirand
transmissioncaseandremovetheplugs,drainingallof
thehydraulicuid(Figure64).
Figure64
1.Hydraulicreservoirdrain
plug
3.Transmissioncasedrain
plug
2.Filter
4.Cleantheareaaroundthehydraulicoillterand
removeit(Figure64).
5.Immediatelyinstallanewhydraulicoillter.
6.Installthehydraulicreservoirandtransmissioncase
drainplugs.
7.Fillthereservoirtotheproperlevel;refertoHydraulic
SystemMaintenance(page51).
8.Starttheengineandcheckforoilleaks.Allowthe
enginetorunforaboutveminutes,thenshutitoff.
9.After2minutes,checkthelevelofthehydraulicuid;
refertoHydraulicSystemMaintenance(page51).
52