Toro 30487N - Adjusting the Traction Drive for Neutral

1
2
G020875
Figure55
1.Bolts
2.Seatplate
4.Movethecontrollevertotheneutralpositionbutnot
locked(Figure57).
5.Pulltheleverbackuntiltheclevispin(onanarm
abovethepivotshaft)contactstheendoftheslot(just
beginningtoputpressureonthespring)(Figure56).
Figure56
1.Clevispin
4.Adjustmentbolt
2.Slot
5.Yoke
3.Jamnuts
6.Checkwherethecontrolleverisrelativetonotchin
console(Figure57).
Note:Itshouldbecenteredallowinglevertopivot
outwardtotheneutrallockposition.
Figure57
1.Neutralposition2.Neutrallockedposition
7.Ifadjustmentisneeded,loosenthenutandjamnut
againsttheyoke(Figure56).
8.Applyingslightrearwardpressureonthemotion
controllever,turntheheadoftheadjustmentbolt
intheappropriatedirectionuntilthecontrolleveris
centeredintheneutrallockposition(Figure56).
Note:Keepingrearwardpressureontheleverwill
keepthepinattheendoftheslotandallowthe
adjustmentbolttomovethelevertotheappropriate
position.
9.Tightenthenutandjamnut(Figure56).
10.Repeatsteps4through9fortheothercontrollever.
11.Installthefrontpanel.
AdjustingtheTractionDrive
forNeutral
Thisadjustmentmustbemadewithdrivewheelsturning.
DANGER
Mechanicalorhydraulicjacksmayfailtosupport
themachineandcauseaseriousinjury.
•Usejackstandswhensupportingthemachine.
•Donotusehydraulicjacks.
WARNING
Theenginemustberunningtoperformthis
adjustment.Contactwithmovingpartsorhot
surfacesmaycausepersonalinjury.
Keephands,feet,face,clothing,andotherbody
partsawayfromrotatingparts,mufer,andother
hotsurfaces.
48