13
SET-UP INSTRUCTIONS
Figure 8
1. Supply Hose 4. Small "R" Clamp
2. Large "R" Clamp 5. Solenoid Valve Shield
3. Wiring Harness 6. Hyd. Control Valve Plug
24. Connect the plug on the wiring harness to the
mating plug from the Hydraulic Control Valve. Then
make connections to the four solenoid valves as
shown in FIG. 8 & 9.
Figure 9
1. 90° Hose Barb 3. Supply Hose
2. Gauge Tube
25. Install Gauge Tube into the 90° street elbow at
through port of Solenoid Assembly and secure
with Compression Adapter. (See FIG. 9)
26. Install Solenoid Valve Shield to top of Solenoid
Mounting Bracket using two (2) 1/4 x 3/8" flange
screws. (See FIG. 8)
Figure 7
1. Boom Support Ass'y 5. Single Barb Turret
2. Extension Boom Pipe 6. Jumper Hose 3/4 x 19"
3. U-bolt 7. Boom Cap
4. Double Barb Turret 8. Jumper Hose 3/4 x 21"
16. Assemble the RH Boom Support Assembly to
the other Extension Boom Pipe.
17. Adjust the Booms to a level position by
adjusting the jam nuts on the adjustable clevis
assemblies (See FIG. 5) to the desired position,
then tighten the end nuts against the Main Frame
plate.
18. Attach three Double Barb Turret Bodies and
one Single Barb Turret Body with Clamp
Assemblies on each Extension Boom Pipe as
shown in FIG. 7.
19. Level Nozzles and space 20" apart. Connect
the Turret Body Assemblies with 3/4" x 19" Jumper
Hoses and a 3/4" x 21" Jumper Hose. Secure with
hose clamps. (See FIG. 7.)
20. Apply thread sealer and install a 90° hose barb
into the top of the Tee at the pump for Boom supply.
Attach one end of the 1-1/4" x 52" Supply Hose to
the 90° hose barb, and secure with a hose clamp.
(See FIG. 10)
21. Attach the other end of the Supply Hose to the
hose barb in Tee at the Solenoid Assembly. Secure
with two hose clamps, one clamp at 1/4" and the
other clamp at 1-1/4" from the hose barb hex. (See
FIG. 8 & 9)
22. Secure the Supply Hose to the Solenoid
Assembly using a large "R" clamp. (See FIG. 8)
23. Route wiring harness across rear of vehicle and
secure to Solenoid Assembly with a small
"R" clamp. (See FIG. 8)
2
1
TO CONTROL
VALVE
WHITE
WHITE
BROWN
BLUE
BLACK
1017
To Next Page
Loading...
