Toro 74534TE GrandStand - Page 52

Figure73
1.Hydraulictank3.Fronthydraulichose
2.Hydrauliclter
7.Changethehydrauliclter;refertoReplacingthe
HydraulicFilter(page52).
8.Connectthehydraulichoseunderthetank.
9.Adduidtothetankuntilitreachesthecoldbafe
ofthetank.
Important:Usethespeciedoilorequivalent.
Otheruidscouldcausesystemdamage.
10.Installthehydraulic-tankcap.
11.Startengineandletrunforabout2minutestopurge
airfromthesystem.
12.Shutofftheengineandcheckforleaks.
Note:Ifoneorbothwheelsdonotdrive,referto
BleedingtheHydraulicSystem(page53).
13.Checktheleveloftheuidandadduid,ifrequired.
Important:Donotoverll.
ReplacingtheHydraulicFilter
ServiceInterval:Aftertherst8hours
Every500hours/Yearly(whichevercomesrst)
WARNING
Hothydraulicuidcancausesevereburns.
Allowthehydraulicuidtocoolbeforeperforming
anymaintenancetothehydraulicsystem.
1.DisengagethePTOandsettheparkingbrake.
2.Shutofftheengineandwaitforallmovingpartsto
stopbeforeleavingtheoperatingposition.
Important:Donotsubstituteautomotiveoillter,
orseverehydraulicsystemdamagemayresult.
3.Locatethelterandplaceadrainpanunderthelter
(Figure74).
Figure74
1.Hydraulictank
2.Hydrauliclter
4.Removetheoldlterandwipethelter-adaptergasket
surfaceclean(Figure75).
5.Applyathincoatofhydraulicuidtotherubbergasket
onthereplacementlter.
6.Installreplacementhydrauliclterontothelter
adapter.
7.Turntheoillterclockwiseuntiltherubbergasket
contactsthelteradapterandtightenthelteran
additional1/2turn(Figure75).
52