Toro 74906 - Stopping the Machine; Adjusting the Height of Cut

DrivingForward
Note:Theenginewillkillifthetractioncontrolleversare
movedwiththeparkingbrakeengaged.
Tostop,pullthemotioncontrolleverstotheneutralposition.
1.Releasetheparkingbrake;refertoReleasingthe
ParkingBrakeinOperation.
2.Movetheleverstothecenter,unlockedposition.
3.Togoforward,slowlypushthemotioncontrollevers
forward(Figure23).
G008952
Figure23
DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,lookbehindandslowlypullthe
motioncontrolleversrearward(Figure24).
G008953
Figure24
StoppingtheMachine
Tostopthemachine,movethetractioncontrolleversto
neutralandtothelockedposition,disengagethepower
take-off(bladecontrolswitch(PTO),andturntheignition
keytooff.
Settheparkingbrakewhenyouleavethemachine;referto
SettingtheParkingBrakeinOperation.Remembertoremove
thekeyfromtheignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhileitis
unattended.
Alwaysremovetheignitionkeyandsettheparking
brakewhenleavingthemachineunattended,even
ifjustforafewminutes.
AdjustingtheHeightofCut
UsingtheTransportLock
Thetransportlockhas2positionsandisusedwiththedeck
liftpedal.Thereisalockpositionandanunlockpositionfor
thetransportposition.Thetransportlockisusedwiththe
deckliftpedal.RefertoFigure25
21