Toro 75930 - Page 64

10.Fine-tunetheadjustmentnutonthefrontdeck
liftassemblybyturningit(Figure93).
Note:T oincreasetheheight,turnthe
adjustmentnutclockwise;todecrease,turn
counterclockwise.
Note:Ifthefrontdecklinksdonothaveenough
adjustmenttoachieveaccuratecutheight,the
single-pointadjustmentcanbeutilizedtogain
moreadjustment.
g027344
Figure93
1.Adjustmentnut3.Reardeckadjustment
2.Jamnut4.Frontdeckadjustment
11.Toadjustthesingle-pointsystem,loosenthe
2boltsatthebottomoftheheight-of-cutplate
(Figure94).
g027345
Figure94
1.Boltsatthebottomoftheheight-of-cutplate
12.Ifthedeckistoolow,tightenthe
single-point-adjustmentboltbyrotatingit
clockwise.Ifthedeckistoohigh,loosenthe
adjustmentboltbyrotatingitcounterclockwise
(Figure95).
Note:Loosenortightentheadjustmentbolt
enoughtomovetheheight-of-cutplatemounting
boltsatleast1/3thelengthoftheavailable
travelintheirslots.Thisregainssomeupand
downadjustmentoneachofthe4decklinks.
g009042
Figure95
1.Adjustmentbolt
13.Tightenthe2boltsatthebottomofthe
height-of-cutplate(Figure94).
Note:Inmostconditions,thebackbladetip
shouldbeadjusted6.4mm(1/4inch)higher
thanthefront.
14.Torquethe2boltsto37to45N∙m(27to33ft-lb).
64