What to do if Toro Lawn Mower starter does not crank?
If the starter on your Toro Lawn Mower isn't cranking, make sure the blade control (PTO) knob is disengaged, the parking brake is set, and the battery isn't dead (charge if necessary). Also, check the electrical connections for corrosion or looseness, and replace any blown fuses. If these steps don't resolve the issue, you may need to contact an Authorized Service Dealer.
What to do if my Toro Lawn Mower engine loses power?
If your Toro Lawn Mower engine is losing power, try reducing your ground speed. You can also clean the air cleaner element, add engine oil to the crankcase, and remove any obstructions from the cooling fins and air passages. Other solutions include installing a new, correctly-gapped spark plug, cleaning or replacing the fuel cap, and replacing the fuel filter.
What to do if my Toro DH 210 engine will not start?
If your Toro Lawn Mower engine won't start, starts with difficulty, or stops running, make sure you're sitting on the seat. Also, check that the fuel tank isn't empty and refill it with gasoline if needed. Another cause might be a dirty air filter, which you should clean or replace. Ensure the spark plug wire is properly connected to the spark plug. Inspect the spark plug itself for damage or incorrect gap, replacing it if necessary. Check if the choke is closing correctly and adjust the throttle cable if it is not. Replace the fuel filter if it's clogged with dirt. Finally, verify that the fuel shut-off valve is open.
Why won't my Toro Lawn Mower engine start?
Your Toro Lawn Mower engine might not start due to several reasons. Ensure you are seated, the fuel tank isn't empty (fill it with gasoline if it is), the air cleaner isn't dirty (clean or replace it), the spark plug wire is properly connected, the spark plug isn't damaged (replace if needed), the choke is closing properly (adjust the throttle cable), the fuel filter isn't clogged (replace if needed), the fuel shut-off valve is open, or the idle speed and mixture aren't set correctly (adjust them accordingly).
Why is my Toro DH 210 Lawn Mower cutting height uneven?
Uneven cutting height on your Toro Lawn Mower can be addressed by setting the tire pressure, adjusting the height adjustment cable rod assembly, cleaning the underside of the mower, and tightening the blade mounting screws.
General| Brand | Toro |
|---|---|
| Model | DH 210 |
| Category | Lawn Mower |
| Language | English |
Guidelines for safe operation of riding lawn mowers.
Pre-operation checks, fuel handling, and operator training.
Safe operating procedures and slope considerations.
Safe practices for maintenance and storage.
Toro product safety and sound level information.
Vibration levels and slope operation guidelines.
Explanation of safety and instructional decals on the machine.
Identifies and describes the machine's controls.
Lists the physical specifications of the machine.
Instructions for safely adding fuel to the machine.
Using fuel stabilizer and filling the tank.
Checking oil, using parking brake, seat, and headlights.
Using blade control, setting cutting height, and gauge wheels.
Procedures for starting and stopping the engine safely.
Understanding and using the safety interlock features.
Enabling and using reverse operation with KeyChoice.
Procedures to test the safety interlock system.
Pushing the machine manually and forward/backward driving.
Operating the traction control and reverse pedals.
Stopping the machine, using bag on demand, emptying collector.
Information on towing attachments and weight limits.
Tips for best performance, cutting quality, and maintenance.
Recommended maintenance tasks by service interval.
Greasing and lubricating the machine.
Servicing the air cleaner foam and paper elements.
Checking and changing engine oil.
Changing the oil filter and servicing the spark plug.
Draining the fuel tank and related safety.
Replacing the fuel filter and servicing headlights.
Replacing fuses and servicing the battery.
Procedures for removing and installing the battery.
Checking the battery electrolyte level.
Adding water to the battery and charging procedures.
Checking tire pressure and servicing the brake.
Removing, installing, and cleaning the grass collector.
Inspecting, sharpening, and removing/installing blades.
Steps to remove and install the mower deck assembly.
Procedure for adjusting the height adjustment cable rod.
Steps for preparing the machine for storage.
Lists common issues and their corrective actions.
Details warranty coverage, conditions, and service instructions.
To Next Page
