Toro GrandStand 74504TE - Schematics

TORO®- Grandstand Service Instruction Manual 7-5
7
MOWER DECK
Spindle Disassembly
1. Remove the lock nut from end of the spindle.
2. Remove the axel washer from the spindle.
3. Remove the spindle hub assembly from the end of
the spindle shaft.
4. Remove the spindle shaft from the spindle housing.
5. Remove the lower spindle bearing.
6. Remove the spacer from the spindle housing.
7. Flip the spindle over and drive the upper bearing out
of spindle housing.
Figure 38