Toro GrandStand 74504TE - Mower Construction; Traction Drive; Wheel and Tires

TORO®- Grandstand Service Instruction Manual
Specifications
2-3
2
Mower Construction
Height of Cut Range 1.5 in. to 5.00 in., in ¼ in. increments
Blades Three, .250 thick heat treated steel blades
Spindles Machined steel 25 mm shaft diameter
Spindle Housing Ductile cast iron, 9-3/8 in. diameter mounted with 6 bolts
Spindle Bearings Sealed 25 mm ball bearings
Deck 7 gauge (.179 in.) steel welded construction
Blade Tip Speed 48 in. - 17,097 ft/m calculated @ 3600 engine RPM
52 in. - 18,651 ft/m calculated @ 3600 engine RPM
60 in. – 18,032 ft/m calculated @ 3600 engine RPM
122 cm – 15,981 ft/m calculated @ 3100 engine RPM
Mower Deck Skid Plate Standard
Adjustable Discharge Bafe Standard
Rubber Discharge Chute Standard
Traction Drive
Integrated Hydraulic
Transmission (IHT)
Tuff Torque - TZT1310 (modied) with cooling fans
Hydraulic Oil Filter Internal Transmission 0.25 Micron Filters
Hydraulic Fluid 15W50 Synthetic Oil (Hypr-oil 500)
Hydraulic Fluid Capacity 5.0 qts (4.7 L) with lter change
Ground Speed Variable: Forward- 0 To 10.0 mph
Reverse- 0 To 4.0 mph
Parking Brake Internal Transmission
Hour-meter Standard Equipment
Wheel and Tires
Front Castor Tires 11 x 4.0-5, Smooth Tread, Semi-Pneumatic. Wheel with tapered roller bearings.
Front Castor Fork Heavy-duty commercial design with 1 in. diameter pivot shaft. Pivot hubs have
tapered roller bearings and grease tting access holes (plugged) for lubrication.
Rear Traction Tires 20 x 10.5 x 8, 4 ply Kenda brand K500 Super Turf