Toro Greensmaster 3150 Series - Backlapping the Cutting Unit; Backlapping Safety Warning; Backlapping Procedure

Standardbedknifereliefangle3°minimum
Extendedbedknifereliefangle7°minimum
FrontAngleRange
13°to17°
BacklappingtheCutting
Unit
DANGER
Contactwiththereelorothermovingparts
canresultinpersonalinjury.
Keepyourngers,hands,andclothingaway
fromthereelsorothermovingparts.
•Stayawayfromthereelwhilebacklapping.
•Neveruseashorthandledpaintbrush
forbacklapping.PartNo.29-9100Handle
assemblycompleteorindividualpartsare
availablefromyourlocalauthorizedToro
distributor.
1.Positionthemachineonaclean,levelsurface,
lowerthecuttingunits,stoptheengine,engage
theparkingbrake,andremovetheignitionkey.
2.Removethereelmotorsfromthecuttingunits
anddisconnectandremovethecuttingunits
fromtheliftarms.
3.Connectthebacklappingmachinetothecutting
unitbyinsertingapieceof3/8inchsquarestock
intothesplinedcouplingintheendofthecutting
unit.
Note:Additionalinstructionsandprocedures
onBacklappingareavailableinyourtraction
unitOperator’sManualandtheToroSharpening
ReelandRotaryMowersManual,FormNumber
80-300PT.
Note:Forabettercuttingedge,runale
acrossthefrontfaceofthebedknifeandreel
whenthelappingoperationiscompleted.This
willremoveanyburrsorroughedgesthatmay
havebuiltuponthecuttingedge.
17