Toro Greensmaster Flex 1018 - Page 125

DisassemblingtheHandleAssembly(continued)
29.Removetheangenut(item8inFigure59),andbolt(2)thatsecurethe
clutchbaillink(5)tothehandlemount(7).Removethe2angebushings
(3)andspacertube(17)fromthehandlemount.
30.Removetheangenut(8)andbolt(2)thatsecuretheclutchbailassembly
(4)tothehandlemount(7).Removetheclutchbailassemblyfromthe
handlemount.Removethecompressionspring(6),2angebushings(3)
andspacertube(17)fromthehandlemount.
31.Removethe2nuts(14)and2bolts(16)thatsecuresthehandlemount(7)
totheupperreceiverweldment(15).Removethehandlemountfromthe
upperreceiverweldment.
g313848
Figure60
1.Lowerhandleassembly4.Nut
2.Bolt5.Frameassembly
3.Washer(2each)
32.Ifnecessary,removethenut(item4inFigure60),washers(3)andbolt(2)
thatsecuresthelowerhandleassembly(1)totheframeassembly(5).
AssemblingtheHandleAssembly
1.Ifremoved,installthelowerhandleassembly(item1inFigure60)ontothe
frameassembly(5)andsecurewiththebolt(2),washers(3)andnut(4).
2.Liftthelowerhandleassemblytomaximumtoppositionandtorquetighten
thebolt(2)to5.6to6.2N·m(50to55ft-lb).
3.Installthehandlemount(7)totheupperreceiverweldment(15)andsecure
with2bolts(16)and2nuts(14).
Greensmaster
®
Flex1018/1021
Page7–21
Controls,WheelsandAccessories:ServiceandRepairs
20247SLRevA