Toro Greensmaster Flex 1018 - Page 160

InstallingtheRearRoller(continued)
5.Centertherearrollerinthecuttingunitandtightentheangenutsateach
oftheretainerassemblies.
6.Adjusttherearrollerheight;refertotheCuttingUnitOperator’sManual.
DisassemblingtheRoller
g313345
Figure85
1.Bearinglocknut(2each)3.Ballbearing(2each)5.Rollershaft
2.Sealingwasher(2each)
4.Wiehleroller
6.Smoothroller
Note:Therearrollerisalowdragroller.
1.Toholdtherollershaft(5)stationarywhileremovingthebearinglocknut(1),
installa3/8-24UNF2Bscrewwithajamnutintothethreadedendofthe
rollershaft(5)andtightenthejamnutagainsttherollershaft.Removethe
bearinglocknuts(1).
2.Carefullyinspecttheseatingsurfaceandthreadsofthebearinglocknuts(1)
andreplacethemifdamaged.
3.Looselysecuretherollerassembly(4)inabenchviseandlightlytaponthe
rollershaft(5)toremovethesealingwashers(2)andbearings(3).Discard
thesealingwashers(2).
4.Cleanandcarefullyremoveanycorrosionfromthebearingcavitiesofthe
roller.
DPACuttingUnits:ServiceandRepairs
Page8–24
Greensmaster
®
Flex1018/1021
20247SLRevA