Toro Greensmaster Flex 1018 - Page 162

InstallingtheFrontRoller(continued)
4.Slidethefrontrollershaft(3)intotheheight-of-cutarm(5)attachedtothe
cuttingunit(10).
5.Slidetheremainingheight-of-cutarm(5)ontotheotherendofrollershaft.
Securetheremainingheight-of-cutarmtothesideplatewithaplowbolt(2),
height-of-cutwasherandlocknut.
6.Centerthefrontroller(3)inthecuttingunitandtightenthepinchbolts(8)that
securethefrontrollershafttotheheight-of-cutarms.
7.Installthecuttingunitassemblytotheframeassembly;refertoOperator’s
Manual,(Ifnecessary).
8.Adjustthecuttingunitheight-of-cut;refertotheCuttingUnitOperator’s
Manual.
DPACuttingUnits:ServiceandRepairs
Page8–26
Greensmaster
®
Flex1018/1021
20247SLRevA