Toro Greensmaster TriFlex 3420 - Checking the Reel-To-Bedknife Contact; Checking the Tire Pressure

Viscosity,ASTMD445cSt@40°C44to50
cSt@100°C7.9to8.5
ViscosityIndexASTMD2270
140to160
PourPoint,ASTMD97-34°Fto-49°F
IndustrySpecications:
VickersI-286-S(QualityLevel),VickersM-2950-S
(QualityLevel),DenisonHF-0
Important:TheISOVG46Multigradeuidhas
beenfoundtoofferoptimalperformanceinawide
rangeoftemperatureconditions.Foroperation
inconsistentlyhighambienttemperatures,18°C
(65°F)to49°C(120°F),ISOVG68hydraulicuid
mayofferimprovedperformance.
PremiumBiodegradableHydraulicFluid-Mobil
EALEnviroSyn46H
Important:MobilEALEnviroSyn46Histheonly
syntheticbiodegradableuidapprovedbyToro.
Thisuidiscompatiblewiththeelastomersused
inTorohydraulicsystemsandissuitablefora
wide-rangeoftemperatureconditions.Thisuidis
compatiblewithconventionalmineraloils,butfor
maximumbiodegradabilityandperformancethe
hydraulicsystemshouldbethoroughlyushedof
conventionaluid.Theoilisavailablein19L(5
gallon)containersor55gallondrumsfromyour
MobilDistributor.
Important:Manyhydraulicuidsarealmost
colorless,makingitdifculttospotleaks.A
reddyeadditiveforthehydraulicsystemoilis
availablein20ml(2/3oz)bottles.Onebottleis
sufcientfor15-22L(4-6gallons)ofhydraulic
uid.OrderPartNo.44-2500fromyourauthorized
Torodistributor.Thisreddyeisnotrecommended
forusewithbiodegradableuids.Usefood
coloring.
Important:Regardlessofthehydraulicuid
typeused,anytractionunitusedforoffgreen
applications,verticuttingorusedduringambient
temperaturesabove29°C(85°F)shouldhaveOil
CoolerKitinstalled;referto5InstallingtheOil
Cooler(optional)(page16).
FillingtheHydraulicTank
1.Positionthemachineonalevelsurface.Make
surethemachinehascooleddownsotheoilis
cold.
2.Removethecapfromthereservoir(Figure27).
g014719
Figure27
1.Hydraulic-tankcap2.Breather
3.Slowlyllthereservoirwiththeappropriate
hydraulicuiduntilthelevelreachestheFull
markinthewhitewindowinthefrontofthe
reservoir.Donotoverll.
Important:Topreventsystem
contamination,cleanthetopofthe
hydraulicuidcontainersbeforepuncturing.
Ensurethepourspoutandfunnelareclean.
4.Installthereservoircap.Wipeupanyuidthat
mayhavespilled.
Important:Checklevelofhydraulicuid
beforeengineisrststartedanddaily
thereafter.
Checkingthe
Reel-to-BedknifeContact
Eachdaybeforeoperatingthemachine,checkthe
reel-to-bedknifecontact,regardlessifthequalityofcut
hadpreviouslybeenacceptable.Theremustbelight
contactacrossthefulllengthofthereelandbedknife;
refertotheCuttingUnitOperator’sManual.
Beforecheckingthereels,disconnectthecutting
unitpowerdisconnectcouplers;refertoCuttingUnit
PowerDisconnectConnectors(page24).Connect
themwhennished.
CheckingtheTirePressure
Varythetirepressureforthefrontwheels,depending
uponyourturfconditions,fromaminimumof83toa
maximumof110kPa(12psito16psi).
Varythetirepressurefortherearwheelfroma
minimumof83toamaximumof110kPa(12psito
16psi).
29