Toro Groundsmaster
3500-D - Chapter 7 Cutting Units; Troubleshooting 7

Rev. E
Groundsmaster 3500--D Page 7 -- 1 Cutting Units (Rev. D)
Chapter 7
Cutting Units
Table of Contents
SPECIFICATIONS 2.............................
TROUBLESHOOTING 3.........................
Factors That Can Affect Quality of Cut 3.........
SPECIAL TOOLS 4.............................
ADJUSTMENTS 5..............................
Height--of--Cut Adjustment 5....................
Adjust Roller Scraper 6........................
Blade Plane Inspection and Adjustment 7........
SERVICE AND REPAIRS 8......................
Blade Stopping Time 8........................
Cutting Unit Removal and Installation 9..........
Cutting Blade Removal and Installation 10........
Inspecting and Sharpening Blade 10.............
Rear Roller 11................................
Rear Roller Service (Non--Greasable Bearings) 12
Rear Roller Service (Greasable Bearings with
Retaining Ring) 13..........................
Rear Roller Service (Greasable Bearings with
Bearing Nut) 1 4.............................
Front Roller Service 16........................
Blade Spindle Service 18......................
Carrier Frame 20.............................
SafetyProduct Records
and Manuals
Kubota
Diesel Engine
Hydraulic
Systems
Electrical
Systems
Wheels, Brakes,
and Chassis
Cutting
Units