EasyManua.ls Logo

Toro Groundsmaster 3500-D - Controls and Hydraulic System; Adjusting the Throttle Control; Hydraulic System Safety and Fluid Specs

Toro Groundsmaster 3500-D
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Groundsmaster 3500--D Hydraulic System (Rev. D)Page 4 -- 5
Towing Traction Unit
In case of emergency, the Groundsmaster 3500--D can
be towed for a short distance. However, Toro does not
recommend this as a standard procedure.
1. Locate by--pass valve on hydrostat pump (Fig. 6)
and rotate it 90
o
to open the by--pass v alve. This open
position should be horizontal (Fig. 7).
IMPORTANT: Do not tow the machine faster than 2 to
3 mph because the drive system may be damaged. If
machine must be moved a considerable distance (more
than a few feet), transport it on a truck or trailer.
2. Slowly tow machine.
3. Before starting engine, close by--pass valve by rotat-
ing it 90
o
. This closed position should be vertical (Fig. 7).
Do not start engine when by--pass valve is open.
1. Hydrostat pump 2. By--pass valve
Figure 6
2
1
1. Valve closed position 2. Valve open position
Figure 7
1
2
SafetyProduct Records
and Manuals
Kubota
Diesel Engine
Hydraulic
System
Electrical
System
Wheels, Brakes,
and Chassis

Table of Contents

Other manuals for Toro Groundsmaster 3500-D

Related product manuals