Toro Reelmaster 5410 - Adjusting the Rear Wheel Toe-in

Figure69
1.Locknut2.Tractionadjustmentcam
Theenginemustberunningsothenal
adjustmentofthetractionadjustmentcamcan
beperformed.Thiscouldcausepersonalinjury.
Keephands,feet,face,andotherbodyparts
awayfromthemufer,otherhotpartsofthe
engine,andanyrotatingparts.
5.Starttheengineandrotatethecamhexineither
directionuntilthewheelceasesrotation.
6.Tightenthelocknuttosecuretheadjustment.
7.Stoptheengineandreleasetheparkingbrake.
Removethejackstandsandlowerthemachineto
theshopoor.
8.Re-attachtheleftbrakecabletothebrakepedal.
9.Testdrivethemachinetomakesureitdoesnot
creep.
AdjustingtheRearWheel
Toe-in
1.Rotatethesteeringwheelsothattherearwheelsare
straightahead.
2.Loosenthejamnutoneachendofthetierod
(Figure70).
Note:Theendofthetierodwiththeexternal
grooveisalefthandthread.
Figure70
1.Jamnut3.Wrenchslot
2.Tierod
3.Usingthewrenchslot,rotatethetierod
4.Measurethedistanceatthefrontandrearoftherear
wheelsataxleheight.Thedistanceatthefrontof
therearwheelsshouldbelessthan1/4inch(6mm)
ofthedistancemeasuredattherearofthewheels.
5.Repeatprocedureasrequired.
48