Toro Reelmaster 5410 - Replacing the Hydraulic Filters; Checking the Hydraulic Lines and Hoses

ReplacingtheHydraulicFilters
Thehydraulicsystemisequippedwithaserviceinterval
indicator(Figure78).Withtheenginerunning,view
theindicator,itshouldbeintheGreenzone.Whenthe
indicatorisintheRedzone,changethehydrauliclters.
Figure78
1.Hydrauliclterrestrictionindicator
Important:Useofanyotherltersmayvoidthe
warrantyonsomecomponents.
1.Positionthemachineonalevelsurface,lowerthe
cuttingunits,stoptheengine,engagetheparking
brake,andremovethekeyfromtheignitionswitch.
2.Cleantheareaaroundtheltermountingarea
andplaceadrainpanunderlter(Figure79)and
(Figure80).
Figure79
1.Hydrauliclter
Figure80
1.Hydrauliclter
3.Removethelter.
4.Lubricatethegasketonthenewlterwithhydraulic
oil.
5.Ensurethattheltermountingareaisclean.
6.Installthelterbyhanduntilthegasketcontactsthe
mountingsurface,thenrotateitanadditional1/2
turn.
7.Repeattheprocedureontheotherlter.
8.Starttheengineandletitrunforabouttwominutes
topurgeairfromthesystem.
9.Stoptheengineandcheckforleaks.
CheckingtheHydraulicLines
andHoses
Daily,checkhydrauliclinesandhosesforleaks,kinked
lines,loosemountingsupports,wear,loosettings,
weatherdeterioration,andchemicaldeterioration.Make
allnecessaryrepairsbeforeoperating.
52