HYDROSTATIC DRIVE SYSTEM
7-14 2007 - 2008 Titan Z Service Manual
7
Motion Control Pivot Assembly Installation
4. Install a bolt and nut securing the steering rod to the
left hand motion control pivot assembly (Fig. 405).
3. Install a cotter pin on the end of the control pivot pin
(Fig. 404).
Fig. 404 IMG-0521
Fig. 405 IMG-0482a
1. Install the left hand motion control pivot assembly
between the seat box assembly and the motion
control bracket (Fig. 402).
Fig. 402 IMG-0519
2. Install the control pivot pin from the outside of the
seat box assembly through the left hand motion
control pivot assembly into the motion control
bracket (Fig. 403).
Fig. 403 IMG-0484a
To Next Page
Loading...
