Toro TRX-250 - Changing the Hydraulic Fluid

5.Installthereplacementhydrauliclterandller
cap(Figure60)andtorquetheboltontopto13
to15.5N∙m(110to140in-lb).
6.Cleanupanyspilleduid.
7.Installthetopcover.
ChangingtheHydraulic
Fluid
ServiceInterval:Every400hours/Yearly(whichever
comesrst)
1.Parkthemachineonalevelsurface,engage
theparkingbrake(ifapplicable),andlowerthe
boom.
2.Shutofftheengineandremovethekey.
3.Allowthemachinetocoolcompletely.
4.Removethecoverplate;refertoRemovingthe
CoverPlate(page23).
5.Removethehydraulic-tankllercapandlter
(Figure60).
6.Placeadrainpancapableofholding37.8L(10
USGallons)underthehydraulictank.
7.Pinchthehoseclampandslidetheclampand
hoseoffthettingonthehydraulictank,allowing
thehydraulicuidtodrainfromthehoseand
tankintothepan.
g007840
Figure61
1.Hose
2.Hydraulic-tanktting
3.Hoseclamp
8.Whennished,installthehoseontothetting
andsecureitwiththehoseclamp.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
9.Fillthehydraulictankwithhydraulicuid;refer
toHydraulicFluidSpecications(page41).
10.Installthehydrauliclterandllercap(Figure
60)andtorquetheboltontopto13to15.5N∙m
(110to140in-lb).
11.Starttheengineandletitrunforafewminutes.
12.Shutofftheengine.
13.Checkthehydraulic-uidlevelandtopitoffif
necessary;refertoCheckingtheHydraulic-Fluid
Level(page42).
14.Cleanupanyspilleduid.
15.Installthetopcover.
43