Toro TX 427 - Cleaning Procedures; Removing Debris from Machine

g004213
Figure63
1.Drainplug
7.Removethedrainplugandallowtheoiltodrain
intothepan(Figure63).
8.Whennished,installandtightenthedrainplug.
Note:Disposeoftheusedoilatacertied
recyclingcenter.
9.Fillthehydraulictankwithhydraulicuidas
speciedinHydraulic-FluidSpecications(page
42).
10.Starttheengineandletitrunforafewminutes.
11.Shutofftheengine.
12.Checkthehydraulic-uidlevelandadduidto
llthetankifnecessary;refertoCheckingthe
Hydraulic-FluidLevel(page42).
13.Installthesidescreenandclosethehood.
Cleaning
RemovingDebris
ServiceInterval:Beforeeachuseordaily
Important:Operatingtheenginewithblocked
screensand/orcoolingshroudsremovedwill
resultinenginedamagefromoverheating.
1.Parkthemachineonalevelsurfaceandlower
theloaderarms.
2.Shutofftheengine,removethekey,andallow
theenginetocool.
3.Openthehoodandsecuretheproprod.
4.Cleananydebrisfromthefrontandside
screens.
5.Wipeawaydebrisfromtheaircleaner.
6.Cleananydebrisbuildupontheengineandin
theoilcoolernswithabrushorblower.
Important:Operatingtheenginewith
blockedscreensand/orcoolingshrouds
removedwillresultinenginedamagedueto
overheating.
7.Cleandebrisfromthehoodopening,mufer,
heatshields,andradiatorscreen(ifapplicable).
8.Closethehood.
44