Toro Z MASTER 2000 Series - Troubleshooting

Troubleshooting
Problem
PossibleCauseCorrectiveAction
1.Cuttingblade(s)is/arebentor
unbalanced.
1.Installnewcuttingblade(s).
2.Blade-mountingboltisloose.2.Tightentheblade-mountingbolt.
3.Looseblowerpulleyorpulley
assembly.
3.Tightentheappropriatepulley.
4.Wornbaggerbelt.4.Replacethebelt.
Abnormalvibration.
5.Blowerfanblade(s)is/arebentor
unbalanced.
5.ContactanAuthorizedServiceDealer.
1.Lowenginespeed.
1.Alwaysoperatetheengineatfull
throttle.
2.Pluggedscreeninbaggerhood.2.Removedebris,leavesorgrass
clippingsfromthescreen.
3.Loosebaggerbelt.3.Replacethebaggerbelt.
4.Apluggedtubeorblower.4.Locateandremovepluggeddebris.
Reducedbaggingperformance.
5.Fullbags.5.Emptythehopper.
1.Bagsaretoofull.1.Dumpmorefrequently.
2.Lowenginespeed.
2.Alwaysoperatetheengineatfull
throttle.
3.Grassistoowet.3.Cutgrasswhenitisdry.
4.Grassistoolong.4.Cutnomorethan51-76mm(2-3
inches)or1/3ofthegrassheight,
whicheverisless.
5.Pluggedscreeninhood.5.Removedebris,leavesorgrass
clippingsfromthescreen.
6.Groundspeedistoofast.6.Drivesloweratfullthrottle.
Blowerandtubesplugtoofrequently.
7.Wornbaggerbelt.7.Replacebelt.
1.Bagsaretoofull.1.Dumpmorefrequently.
2.Groundspeedistoofast.
2.Drivethemachineatslowground
speedwhileoperatingtheengineat
fullthrottle.
Debrisblowout.
3.Mowerdeckisnotleveled.
3.SeethemachineOperator'sManual
forlevelingthemowerdeck.
1.Pluggedblower.1.Removedebris,leavesorgrass
clippingsfromtheblowerimpeller.
Blowerimpellerdoesnotspinfreely.
2.Impellernotaligned.
2.ContactanAuthorizedServiceDealer.
32