Toro Z MASTER 2000 Series - Setup; Loose Parts

Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemower.
Leftbumper
1
Leftframe-supportbracket
1
Rightbumper1
Rightframe-supportbracket
1
Carriagebolt(3/8x1-1/4inches)
6
2
Flangenut(3/8inch)
6
Installthesidebumpersandsupport
brackets.
Tailpipeextension1
3
Washer-headscrew(#8x1/2inch,
self-threading)
1
Installthemuferextension.
Exhaustshield1
Flange-hex-headbolt(3/8x1inch)
2
4
Nut(3/8inch)
2
Drilltheexhaust-shieldmountingholes.
Exhaustshield1
Flange-hex-headbolt(3/8x1inch)
3
5
Nut(3/8inch)
3
Installtheexhaustheatshield.
Hopper-supportframe
1
Hairpin2
6
Hoodhold-downrod1
Installthebaggermountingbrackets.
Baggerhood1
Bafe
1
7
Hairpin(small)
2
Installthehoodbafe.
Hoodassembly1
8
Bag2
Installthehoodassemblyandbags.
Blower(fromthebloweranddrivekit)
1
9
Blowerbelt(fromthebloweranddrive
kit)
1
Routetheblowerbeltintotheblower
assembly.
Blowerassembly(fromtheblowerand
drivekit)
1
10
Spring(fromthebloweranddrivekit)
1
Installtheblowerassembly.
Beltcover(fromthebloweranddrivekit)
1
11
Coverknob
1
Installthebeltcover.
Upperdischargetube1
Screw(1/4x3/4inch)
3
Locknut(1/4inch)
3
12
Lowerdischargetube1
Installthedischargetubes.
5