53
DeutschEnglish
4.5 After operation
Switch motor and batteries off after each trip by turning the ignition
key to the left. Dark display indicates shut-down of the system.
Warnings and errors
1
Warnings and errors
display
2
Display of system
software version
(no error message)
1
2
• Afteruse,alwaystiltthemotoroutofthewatertoensurerunning-off
and draining of the cooling conduit and prevent corrosion, wear and
obstruction.
• Afteroperationinsaltorbrackishwater,rinseallcomponentswith
fresh water. Please do not use a high-pressure water blaster for
cleaning, as the water pressure may do harm.
• Ifyoucannottiltthemotorentirelyoutofthewater,werecommend
to apply additional corrosion protection in the form of zinc savers,
galvanic isolation or a grounded sacrificial anode directly on the jetty.
When boat is not being operated and swimmers are in the vicinity of
the boat, ensure motor is completely switched off to avoid accidental
starting or engagement of motor.