toscano Vigilec Mono V1M User Manual

ENGLISH ( EN )
23
3. LED SIGNALLING
Depending on the operation being performed or the warning that the equipment is
indicating, the LEDs will light up in different colors and in a xed or intermittent manner.
While scrolling through the various parameters, pay attention to the meaning shown in
the “During adjustment” column. If the equipment is in operation and the control panel is
not being used, look at the “In operation” column.
Parameter selection
“Overload setting”
Parameter modication
“Overload setting”
Parameter selection
“Underload setting”
Parameter modication
“Underload setting”
Parameter selection
“Restart time setting”
Parameter modication
“Restart time setting”
Parameter selection
“Inhibition time setting”
Parameter modication
“Inhibition time setting”
Parameter selection
“Datalogger and advanced
option setting”
Parameter modication
“Datalogger and advanced
option setting”
Overload detected
Overload trip
Underload detected
Underload trip
Restart time running
Inhibition time running
Low level detected
Pump running
Main alarm activated
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
IminImin Imin
Imax
Imax Imax
●
During adjustment
●
In operation
Fixed
Flashing
Distribuido por Adajusa

toscano Vigilec Mono V1M Specifications

General

Brand	toscano
Model	Vigilec Mono V1M
Category	Control Panel
Language	English