toscano Vigilec Mono V1M - Setting-Up (Wall Mounting)

ENGLISH ( EN )
25
5. SETTING-UP (WALL MOUNTING)
V1N
1
Place the xing brackets in the anchor points
established for this purpose.
2
Drill holes in the wall using the location where
you have placed the xing brackets.
3
Insert the screws to anchor the equipment by
using the xing brackets.
Drill the wall at the indicated dimensions (in mm) and screw the equipment directly to
the wall.
A full-size template is enclosed with the drilling indications for easier fastening.
Clamping brackets mounting
Direct wall mounting
98
144
140
194
V1M
Distribuido por Adajusa