11
E
Guide to using the menu system/Selecting the video input source
Make sure the antenna connection
and power supply are connected as
per the description on page 9.
Preparation:
Turn on the unit with the
(On/
Standby) button on the top of the unit.
The
(On/Standby) indicator will
light up in green.
To change the unit to standby mode,
press
(On/Standby) on the remote
control.
(On/Standby) indicator will
change from green to red. To turn on
the unit from standby mode, press
(On/Standby) on the remote control
again.
In standby mode, you can also turn the
unit on with
(Channel) ▲/▼ on the
unit or P + or – on the remote control.
To turn off the unit press
(On/
Standby) button on the unit - to
completely switch it off, disconnect the
mains power supply.
Guide to using the menu system
1
Press MENU, the menu will ap-
pear on the screen.
EXIT : END MENU: RETURN
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2
Press or to view the 3 menu options (PICTURE),
(AUDIO),
(SETUP).
EXIT : END MENU: RETURN
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
PICTURE
menu
Each setting
option
Short guide
AUDIO
menu
SETUP
menu
Indicates more
options - scroll down
3
Press or to select whichever item you require. The
function can be activated by pressing ENTER.
Note:
Some of the menus have more than one page of items - a
scroll bar indicates that you can scroll down or up to select
other items.
4
Press EXIT to return to the normal screen.
Selecting the video input source
Press INPUT SELECT to view a signal
from another device connected to
your TV, such as a VCR or DVD player.
You can select each input source
depending on which input jacks you
used to connect your devices.
To select the video input source, press
/ . Then press ENTER within 6
seconds.
Note:
If no buttons are pressed for more
than approx. 60 seconds, the MENU
disappears automatically.
EXIT : END
TV
AV1
AV2
AV3
COMPONENT
HDMI1
INPUT SELECT
32L0141B_Eng.indd 1132L0141B_Eng.indd 11 6/7/2007 9:21:13 AM6/7/2007 9:21:13 AM
To Next Page
Loading...
