Toshiba 26W300P - Changing the Order of Stored Channels

14
Changing the order of stored channels
Note:
When allocating your channels, we
recommend that you start with CH 1,
continuing with the other channels
afterwards.
The Automatic station presetting
stores the stations found in a
specific order. This will normally
be the correct order, however if
it is necessary the order can be
changed.
1
Press MENU, the menu will
appear on the screen.
Press
or to select
(SETUP) menu.
EXIT : END MENU: RETURN
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
2
Press or to select CH
ALLOCATION, then press
ENTER.
EXIT : END MENU: RETURN
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION 0
AUTO 4:3 DEFAULT
16:9
3
Press or to select desired
option, then press ENTER.
Description about the each
setting option:
SORT: Press
or to select
the channel that you want to
move, then press ENTER.
Press
or to select the
position that you want to move
the channel to, then press
ENTER.
EXIT : END MENU: RETURN
SORT
ERASE PROGRAM
SKIP
CH LABEL
ERASE PROGRAM: Press or to select the channel
that you want to erase, then press ENTER.
SKIP: Press
or to select the channel that you want
to skip, then press ENTER.
mark will appear.
CH LABEL: Press
or to select channel that you
want to rename, then press ENTER. Press
or to
select character, then press
or . The cursor will move
to the next position. Press ENTER to set the channel label.
4
After setting the each option, press EXIT to return to the
normal screen.
32L0141B_Eng.indd 1432L0141B_Eng.indd 14 6/7/2007 9:21:14 AM6/7/2007 9:21:14 AM