16
Getting started
Channel Skip
To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control
must be removed as the channels will still be available
using the number buttons. Programmes can then be
watched as normal using the controls on the television,
but the television will not show the skipped programme
position.
1 In the SETUP menu, press ▼ to highlight Channels
and press ► or
to select.
2 Press ▲ or ▼ to highlight Channel Skip and press
► or to select.
Auto Scan
Update Scan
Single RF Scan
Channel Skip
Channel Sort
Channel Edit
Channels
Select Back Exit
EXIT
Enter
OK RETURN
3 Press ▲ or ▼ to select the channels you want to
skip, then press to set.
Channel Skip
Select Back Exit
EXIT
Set
OK RETURN
1 Digital ABC HDTV
The skipped programme positions cannot be selected by
and or by the controls on the television, but can
still be accessed by the number buttons on the remote
control.
Channel Sort
Change the order of the programme list.
1 Select Channels from the SETUP menu.
2 Highlight Channel Sort and press ► or to select.
3 Pressing to check two channels to swap the
positions.
Channel Sort
Select Back Exit
EXIT
Set
OK RETURN
1 Digital TEN HD 123456789 abcdefgh...
2 Digital ABC HDTV
3 Digital TEN Digital 123456789 abc...
4 Digital TEN HD 123456789 abcdefgh...
5 Digital ABC1
6 Digital ABC1
7 Digital ABC2
8 Digital ABC3
9 Digital ABC DiG Radio
10 Digital ABC DiG Jazz
Channel Edit
Edit the channel number and channel name.
1 Select Channels from the SETUP menu.
2 Highlight Channel Edit and press ► or to select.
3 Press ▲ or ▼ to highlight the channel and press
to select.
4 Change the Channel Number by using the number
buttons 0~9. Change the Channel Name by using
the number buttons 0~9 to enter numbers and letters.
Note: The Colour System/Sound System can be
changed only in Analogue TV.
Network Name: ABC Sydney
2
ABC HDTV
B/G
Auto
191.5
Channel Number:
Channel Name:
Frequency
Colour system
Sound system
Channel Edit
Select Back Exit
EXIT
Set
OK RETURN
To Next Page
Loading...
