28
Using the TV’s features (General)
Auto Standby
When the Auto Standby is enabled, switching off the
television will automatically switch off all connected
REGZA-LINK equipment.
1 Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or to select.
2 Use ▲ or ▼ to select the Auto Standby, then press
◄ or ► to select On or Off.
Amplifier Control
When the Amplifier Control is enabled, REGZALINK
allows some of the amplifier features to be controlled
with the television remote control.
1 Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or to select.
2 Use ▲ or ▼ to select the Amplifier Control, then
press ◄ or ► to select On or Off.
Speaker Preference
This feature allows the audio output preference to be
set to the TV speakers or AV amplifier speakers. The AV
Amplifier option lets the televisions remote control adjust
or mute the volume of the audio.
1 Highlight the REGZA-LINK Setup in the
PREFERENCES menu, and press ► or to select.
2 Use ▲ or ▼ to select the Speaker Preference, then
press ◄ or ► to select TV Speakers or Amplifier.
One Touch Play
The function of REGZA-LINK will automatically power on
the television that was in standby mode and switch the
television’s input source to the port connected with the
audio/video equipment by powering-on or playing from
the audio/video equipment.
NOTE: This feature is dependent on the connected
equipment and television setting.
System Standby
This feature automatically switches the connected
equipment into standby when the television goes into
standby and conversely for the television to switch into
standby when connected equipment goes into standby.
It is selected in the REGZA-LINK setup menu.
NOTE: This feature is dependent on the connected
equipment and television setting.
System Audio Control
Using the Speaker Preference feature allows the
televisions remote control to adjust the volume or mute
the sound of the speakers connected to the television
via an AV amplifier.
Ensure that the connected AV amplifier and REGZA-
LINK equipment are selected in the input source
selection and that the Speaker Preference is set to
Amplifier in the REGZA-LINK setup menu.
NOTE: When the AV Amplifier is switched on, its input
source changed or the volume adjusted, the sound
will be output from the AV Amplifier’s speakers even
if TV Speakers has been selected. Turn the television
off then on again to output the sound from the TV’s
speakers.
The full function may not work and is dependent on the
Amplifier being used.
PC Link
This feature automatically adjusts the suitable
widescreen formats and picture preferences when
connected to a REGZA-LINK PC.
NOTE: This feature is dependent on the connected
equipment.
Input Source Selection
When any equipment using CEC technology is
connected, the REGZA-LINK icon will appear in the
input source list allowing selection of individual devices.
1 Press . A list will appear on screen showing
modes and all stored external equipment.
Main
TV
1
2
3C
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
4C
To Next Page
Loading...
